Digital Light Processing (DLP) technology from Texas Instruments, patented rear-projection TV --- an alternative to LCD or plasma TV, High Definition Television (HDTV intended to make the information). DLP TV, lights provide light for the image and contrast to television. However, these lights burn out and need to be replaced.
Why DLP?
The first DLP TV is a good alternative to LCD, for far cheaper (than maxes around 25 per cent) compared to LCD and in the larger screen size (about 42 inches LCD, which will most DLP models 40-70 cm). This is also better than plasma TV, good price (around 50 per cent lower) and a much longer life.
Why use dlp lamps light?
Plasma TV with millions of small light bulb filled with gas, after about 50,000 hours, away from gas-gas, so TV is not useful. DLP TV, on the other hand, using the lights for his explanation. The lamp lights for each exchanged, such as incandescent light bulb for normal desktop, so that TV can be used without limit.
How long is a light load Kam?
8.000; DLP lamps usually required three hours of light (if the TV is about two years on 10 hours a day, every day, lighting requirements). A dlp lamp may take longer if it is used less frequently. DLP TV is usually light to use at home will last for three minutes at least four years ago, before they start to flash and should be replaced.
How do you know if a bulb needs changing?
Unlike the light bulb, which can burn suddenly and go really dark, ball DLP lamps usually starts flashing before finally burned. TV warning, usually the signal lights flash lamp must be replaced. Television picture can suddenly disappear and gradually the lights on the front of the main fight is dark.
How can I change the dlp light bulb?
Dlp lamps can be replaced without special tools. Make sure the unit is turned off and the television has completely separated from power, at least for a few minutes. Then remove with a screwdriver, a small door in the back of the TV and remove the old lamp. Enter a new light on the photo and slide back in. Finally, screw the door and watch the TV set.
What is the cost of a dlp bulb?
DLP lamps usually cost between $ 150 and $ 300, and they are widely used by retailers to sell TV-(such as Best Buy, Wal-Mart, and other electronic transactions), or the number of online shops. What better way to create a new lamp is by purchasing a service contract in which the TV purchase. These contracts typically cost $ 100 or less per year and can be purchased on a regular basis. By contract, you get the DLP lamps replacement without additional charges.
How do you get a new dlp lamp?
A dlp lamp can be purchased from retailers or direct from TV manufacturers. With a service contract, it may be obtained from your contract. This does not need to wait for a bulb burns or flicker, before the new light, especially if it's purchased within the service contract. In fact, it is probably a good idea to have a single bulb preparation, before the contract ends.
